DIGITUS USB 2.0 to RS232 adapter cable, 1.8 m, integrated FTDI chipset

Broj artikla: DA-70170

EAN: 4016032505969

USB to DB9 RS232 cable with FT232RNL Chipset Transparent PVC Jacket, 1.8 m

Cable and adapter in one - 1.8 m long USB-to-RS232 cable with integrated FTDI/FT232RNL chipset for ready-to-use serial communication.

Cable with integrated adapter function - no separate hardware required
Stable and seamless serial communication via modern USB ports - ready for immediate use thanks to the reliable FTDI chipset and automatic driver support.
Broad operating system compatibility: Windows, macOS, Linux, ChromeOS
USB 2.0-compliant, downwards compatible with USB 1.1
Customizable data transfer rates: 75 to 128,000 bps
RS232 interface via USB-A - easy integration into existing systems
Real RS232 output with 5V / 3.3V / 2.8V / 1.8V and TTL input - clean signal levels
Gold-plated contacts - optimum conductivity and corrosion protection
Full-duplex communication - simultaneous sending and receiving of data
COM port retention - automatic port recognition on restart or reconnection
Secure screw connection - firm hold for serial devices and peripherals

Vendor overview

More product information

Opis

USB 2.0 to RS232 adapter cable (cable length: 1.8 m) combines data cable and adapter in one compact solution. The integrated high-quality FTDI/FT232RNL chipset reliably converts USB signals into serial RS232 signals and thus enables the direct connection of modems, measuring devices, controllers or other RS232 peripherals to a PC or notebook. Automatic driver installation under Windows, macOS, Linux and ChromeOS means the cable is ready for immediate use. Gold-plated contacts ensure long-lasting and stable signal transmission, while LED status indicators make active data traffic clearly visible. An additional 180 cm USB connection cable increases installation flexibility.

Tehnički detalji

USB 2.0 to RS232 (DB9 connector) adapter cable
Chipset: FTDI / FT232RNL
Full duplex interface
Data transfer rates from 75 bps to 128,000 bps
Supports remote wake-up and energy management
Compatible operating systems: Windows 11 / 10 / 8.1 / 8 / 7 / Vista / XP, macOS X, Linux, ChromeOS
Automatic driver installation for Windows 7+, macOS 10.15+ and Linux
Real RS232 output: 5V / 3.3V / 2.8V / 1.8V
1x RS232 DB9 plug to 1x USB-A plug
Fastening with pre-assembled screws or nuts
COM port retention ensures consistent port assignment

Sadržaj paketa

USB 2.0 to RS232 adapter cable (FTDI / FT232RNL chipset)
User manual

Downloads and Certificates

Tehnička dokumentacija

Datasheet HR

Vodič za brzi početak

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	80	10,70	46,00	23,50	37,00	39.997,00
Jedinica pakiranja (unutarnja)	1	0,13	0,00	0,00	0,00	0
Jedinica pakiranja (pojedinačna)	1	0,13	3,50	11,00	11,00	423,50

Carisnki tarifni broj: 8471800000

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com