DIGITUS Premium CAT 5e SF-UTP crossover patch cord

Broj artikla: DK-1531-020-CO

EAN: 4016032215837

CAT 5e SF-UTP crossover patch cord, Cu, PVC AWG 26/7, length 2 m, color grey

Future-oriented standards and high-end quality for your network.

Transfer rate up to 100 MHz
Conductor: Copper (Cu)

Vendor overview

More product information

Opis

The DIGITUS® Category CAT5e, Class D, SF-UTP patch cords are manufacutred and tested to the ISO/IEC 11801 and DIN EN 50173 CAT 5e specifications. DIGITUS® patch cords will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® CAT 5e cabling. DIGITUS® offers a various range of colors and lengths. The cable length is stated on each connector and it is suitable for use in routers, switches servers and other active and passive components. The cables are packed in individual DIGITUS® polybags.

Tehnički detalji

2x RJ45 (8P8C) connectors
Boots with kink protections and strain reliefs
Length marking on boot
4 x 2 AWG 24/7, twisted pair
Conductor: Cu

Attributes

Ambalaža: DIGITUS Polybag
Asortiman: Patch kabeli s upredenim paricama
Konektor 1: Modularni RJ45 (8/8) utikač
Konektor 2: Modularni RJ45 (8/8) utikač
Konfiguracija: križanje
Kategorija: CAT 5e
Oklop: SF-UTP, oklop od folije i pletenice
Duljina: 2 m
Boja: sivi
Kapica: PVC
Struktura: 4 x 2 AWG 26/7, upletena parica
Tanka verzija: Ne
Flat Version: Ne

Downloads and Certificates

Certifikati

DK-1531-XX

Tehnička dokumentacija

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	180	13,90	46,00	33,00	28,00	42.504,00
Jedinica pakiranja (unutarnja)	10	0,77	12,00	25,00	30,00	9.000,00
Jedinica pakiranja (pojedinačna)	1	0,08	16,00	4,00	33,00	2.112,00

Carisnki tarifni broj: 8544421000

ETIM Class: EC000000

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Ensure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com

Pribor

Poveznički kabel