Optički patch kabel s više modova, OM4, LC/SC

DIGITUS Optički patch kabel s više modova, OM4, LC/SC

Broj artikla: DK-2532-01-4
EAN: 4016032308911

AL 5LCSC-01/4I PATCH KABEL 50um 1,0M-D MM OM4 50/125 æ, 1 m

Standardima orijentirani prema budućnosti i vrhunska kvaliteta za vašu mrežu.

Vendor overview

More product information

Opis

Optički patch kabel, duplex, LC na SC, MM OM4 50/125 µm, 1 m

Tehnički detalji

  • Duplex kabel
  • LSOH
  • Čep s keramičkom ferulom
  • Promjer kabela 2 mm
  • Individualno zapakirano s izvješćem o mjerenju
  • Boja: RAL 4003

Attributes

  • Ambalaža: DIGITUS Polybag
  • Asortiman: Patch kabeli s optičkim vlaknima
  • Broj konektora strane 1: 1
  • Broj konektora strane 2: 1
  • Kabel u boji: Erikaviolett ljubičasti
  • Kabelski omotač: LSOH
  • Klasa vlakna: OM4
  • Konektor 1: LC
  • Konektor 2: SC
  • Mod: Višemodni
  • Promjer kabela: 2 mm
  • Promjer vlakna: 50/125µ
  • Vrsta kabela: I-VH 2G50/125µ
  • Duljina: 1 m

Downloads and Certificates

Tehnička dokumentacija

Logistika

  Broj
(komad) 		Težina
(kg) 		Dubina
(cm) 		Širina
(cm) 		Visina
(cm) 		cm³
Jedinica pakiranja (vanjska) 160 6,40 41,00 41,00 28,00 47.068,00
Jedinica pakiranja (unutarnja) 20 0,80 19,00 19,00 12,00 4.332,00
Jedinica pakiranja (pojedinačna) 1 0,04 17,00 17,00 1,00 289,00
Carisnki tarifni broj: 8544700000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com