DIGITUS Wall-mounted enclosure - SOHO, Slim

Broj artikla: DN-19 04U-PB

EAN: 4016032200109

Wall mounting cabinet, SOHO, slim, 145x525x475 mm 3U rotatable, 2U fix, color grey (RAL 7035)

DIGITUS® wall-mounted enclosures are manufactured, designed and developed to meet the high demands of IT infrastructure.

Slim housing for installations where space is limited
Door stopper mechanism allows installation in any direction on the wall, ceiling or raised floor
3U rotatable profile rail at the front, 2U fixed profile rail at the rear
Pre-punched cut-outs for cable routing and fastening cable ties
Punched-out mounting holes throughout the lower housing area for fixing a wide variety of components
Load capacity for the installation of components: 30 kg

Vendor overview

More product information

Opis

The SOHO, Slim wall-mounted enclosures are ideal for housing active and passive components. They are characterized by simple and time-saving installation. The modern design fits into any office or home. The enclosure has 2 separate installation options: A rotatable vertical 3U rail is attached to the front. Alternatively, this can also be positioned horizontally or at an angle. A horizontal 2U rail is attached to the rear (fixed), which can be used for passive network components, for example. The punched-out mounting holes in the entire lower housing area also allow components that are not 483 mm (19") compatible to be installed (e.g. DSL routers, etc.).

Tehnički detalji

Protection class IP20
Lockable housing with transparent polycarbonate pane
Upper part of the housing can be opened up to 80°
Steel door stop mechanism keeps the door open
1-point four-point locking
2 separate 483 mm (19") installation options: 3U vertical (rotatable), 2U horizontal (fixed)
Max. installation depth (from front vertical rail to stop on rear horizontal rail): Approx. 265 mm
Max. installation depth (from front vertical rail to rear wall stop): Approx. 355 mm
2.0 mm thick sheet steel with a high load-bearing capacity, powder-coated
Pre-punched cut-outs for cable routing
Ventilation slots for active and passive ventilation
Area for cable ties
Lower housing area with punched-out mounting holes for mounting equipment that is not 483 mm (19") compatible
Fan mount dimensions: 57.5 x 57.5 mm
Hole spacing for fan mounting: 50 x 50 mm (3.5 mm diameter)

Attributes

Bočne ploče: Obje strane
Boja: svijetlo siva, RAL 7035
Dubina: 475 mm
Jedinice: 5
Kapacitet opterećenja: 30 kg
Prednja vrata: Staklena vrata, jednostruko otvaranje
Širina: 525 mm
Vrsta ormara: Zidni ormarić, kućna automatika
IP klasa zaštite: IP20
Montirano: Da

Sadržaj paketa

2 x key

Downloads and Certificates

Tehnička dokumentacija

Datasheet HR

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	1	9,50	50,00	53,00	16,00	42.400,00
Jedinica pakiranja (unutarnja)	1	9,50	50,00	53,00	16,00	42.400,00
Jedinica pakiranja (pojedinačna)	1	9,50	50,00	53,00	16,00	42.400,00

Carisnki tarifni broj: 9403208000

ETIM Class: EC002499

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.