DIGITUS Dynamic-N series wall-mounted enclosure - 600x450 mm (WxD), unassembled

Broj artikla: DN-37112

EAN: 4016032488651

16U wall mounting cabinet, Dynamic-N 600 x 450 mm, unmounted, grey

The unassembled delivery of the wall-mounted enclosures ensures optimized transport options. Assembly can be carried out quickly and easily.

Optimum ventilation and air extraction
Lockable safety glass door with steel frame
483 mm (19") profile rails at the front and rear inside the enclosure, galvanized
Supplied unassembled

Vendor overview

More product information

Opis

The Dynamic-N series wall-mounted network cabinets have been developed for simple and particularly cost-optimized network expansion. The roof, base and rear panel of each cabinet are equipped with a pre-punched cable inlet. The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.2 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side panels and the lockable and removable front door improve accessibility. The door hinges can be changed. Wall mounting is carried out in two simple steps: The supplied mounting plate is screwed to the wall and then connected to the housing. For simplified logistics, the Dynamic-N series is supplied unassembled in a space-saving flat pack. The wall-mounted housing can be installed quickly and easily using the enclosed installation instructions.

Tehnički detalji

Protection class IP20
Lockable safety glass door with steel frame
230° door opening angle
1-point locking on the front door
483 mm (19") profile rails at the front and rear inside the enclosure, galvanized
483 mm (19") profile rails are adjustable in depth and marked with the height unit
1.0 - 1.2 mm robust sheet steel with high load-bearing capacity, powder-coated
Cable entry possible at the rear, roof and base (pre-punched cut-outs)
Roof is prepared to accommodate a fan element (punched-out mounts)
Ventilation slots for active and passive ventilation
4 earthing points (base, side panel and front door) with protective cap
Installation depth for components (standard maximum): 219 - 320 mm

Attributes

Bočne ploče: Obje strane
Boja: svijetlo siva, RAL 7035
Dubina: 450 mm
Jedinice: 16
Kapacitet opterećenja: 60 kg
Prednja vrata: Staklena vrata, jednostruko otvaranje
Širina: 600 mm
Vrsta ormara: Zidni ormarić
IP klasa zaštite: IP20
Montirano: Ne

Sadržaj paketa

Earthing cable set
Installation set (screws, cage nuts, washers)
2 x key
Assembly instructions

Downloads and Certificates

Tehnička dokumentacija

Datasheet HR

Priručnik

Manual

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	1	28,00	65,00	83,00	28,00	151.060,00
Jedinica pakiranja (unutarnja)	1	28,00	65,00	83,00	28,00	151.060,00
Jedinica pakiranja (pojedinačna)	1	28,00	65,00	83,00	28,00	151.060,00

Carisnki tarifni broj: 9403208000

ETIM Class: EC002499

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.