DIGITUS Rasprskivač s aluminijskim profilom i osiguračem, 8 talijanskih utičnica, 2 m napojni kabel, IEC C14 utikač

Broj artikla: DN-95410-IT
EAN: 4016032483861

1U Aluminum PDU, 8x Italian outlets, Pre-fuse 10A Plug, 250VAC 50/60Hz, IEC C14 plug,

Sigurno i profesionalno napajanje u 482,6 mm (19") formatu

  • Savršeni izvor napajanja za vaše kućište od 482,6 mm (19")
  • Ležišta su rotirana za 45°, što omogućuje optimalno iskorištavanje prostora i jednostavan pristup.

More product information

Opis

DIGITUS® produžni kabeli s utičnicama savršeno su rješenje za vaš mrežni ili serverski ormar. Što se tiče raspodjele električne energije, PDU ispunjava zahtjeve mnogih primjena u IT-u, mrežnoj tehnologiji, laboratorijima pa čak i kod kuće. Može se montirati vodoravno ili okomito, a ovisno o vrsti ormara, produžni kabel s utičnicama može se pričvrstiti tako da su utičnice okrenute prema gore ili prema dolje.

Tehnički detalji

  • rezervni osigurač
  • Hoizontalna 19-inčna instalacija u racku
  • Rotacija limenki: 45°
  • Ograda: aluminijski profil
  • Plastične komponente izrađene od ABS-a UL-94V-0
  • Ulaz: IEC C14 utikač, 230 VAC / 10 A
  • Izlaz: 8 x talijanskih utičnica, max. 10 A po izlazu
  • Napojni kabel: poprečni presjek kabela: 1,5 mm², duljina: 2 m
  • Dimenzije: 482,6 mm (19") x 45 (1U) x 45 mm (VxŠxD)

Sadržaj paketa

  • Opseg isporuke: 1 produžni kabel, 2 nosača za montažu; 1 upute o sigurnosti

Downloads and Certificates

Certifikati

Tehnička dokumentacija

Logistika

  Broj
(komad)
Težina
(kg)
Dubina
(cm)
Širina
(cm)
Visina
(cm)
cm³
Jedinica pakiranja (vanjska) 10 12,10 19,50 52,00 29,50 29.913,00
Jedinica pakiranja (unutarnja) 1 1,21 0,00 0,00 0,00 0
Jedinica pakiranja (pojedinačna) 1 1,21 9,70 51,00 5,80 2.869,26
Carisnki tarifni broj: 8544429090

Safety notes

  • This product is not intended for unsupervised use by children or persons under their care!
  • Prevent higher humidity or temperatures than those specified in the data sheet - Avoid moisture, dust or vapors, solvents, flammable gases.
  • Multiple sockets are not designed for permanent use with heavy loads!
  • Multiple sockets must not be cascaded (avoid stringing together several multiple sockets).
  • The maximum connected load must not be exceeded.
  • Defective multiple sockets must be taken out of service immediately and disposed of in an environmentally friendly manner.
  • In the event of a fault, take the product out of operation and contact a qualified electrician.
  • Do not open the product.
  • Disconnect the product from the power supply before cleaning. Do not use any aggressive or abrasive cleaning agents for cleaning.
  • The ingress of liquids can lead to a short circuit.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com