Cabo de ligação multimodo de fibra ótica, OM4, LC / LC

DIGITUS Cabo de ligação multimodo de fibra ótica, OM4, LC / LC

Número do produto DK-2533-02-4
4016032308805

Cabo de ligação de fibra ótica, duplex, LC para LC MM OM4 50/125 µ, 2 m

Padrões orientados para o futuro e qualidade de topo de gama para a sua rede.

Distribution Partner Overview

More product information

Descrição

Cabo de ligação de fibra ótica, duplex, LC para LC,MM OM4 50/125 µ, 2 m

Technical details

  • Cabo duplex
  • LSOH
  • Tampão com virola de cerâmica
  • Diâmetro do cabo 2mm
  • Embalagem individual com protocolo de medição
  • Cor: RAL 4003

Atributos

  • Assortment: Fiber Optic Patch Cables
  • Cable diameter: 2 mm
  • Color cable: erika violet
  • Connector 1: LC
  • Connector 2: LC
  • Fiber class: OM4
  • Fiber diameter: 50/125µ
  • Mode: Multimode
  • Length: 2 m

Downloads and Certificates

Ficha de dados

Logística

  Número
(pcs) 		Peso
(kg) 		Profundidade
(cm) 		Largura
(cm) 		Altura
(cm) 		cm³
Embalagem em Cartão 120 9,00 41,00 41,00 28,00 47.068,00
Embalagem Interior 15 1,13 19,00 19,00 12,00 4.332,00
Embalagem Única 1 0,08 17,00 17,00 1,00 289,00
Número de taxa alfandegária: 8544700000
ETIM Class: EC001263

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com